FREQUENTLY ASKED QUESTIONS

Burke Sealcoating is a trusted local contractor providing professional driveway and parking lot sealcoating services throughout Columbus and surrounding areas.

Clear all vehicles, clean off debris, and ensure the area is dry. Your contractor will take care of any prep work like crack filling.

Yes. Line striping is typically done 24–48 hours after sealcoating, once the surface is fully dry.

Sealcoating helps improve appearance, but oil-stained areas must be properly cleaned or treated before application for best results.

For high-traffic areas, sealcoating should be reapplied every 1–2 years, depending on wear and weather exposure.

With proper application and maintenance, sealcoating lasts 2–3 years on most driveways.

Avoid parking for 48 hours, keep the surface clean, and reseal every 2–3 years to maintain protection.

If the asphalt is faded, cracking, or absorbing water instead of repelling it, it’s time to sealcoat.

Absolutely. Regular sealcoating can double the lifespan of a parking lot by preventing water intrusion and surface degradation.

No. When applied and cured properly, sealcoating results in a smooth, non-slip finish.

DIY kits exist, but professional sealcoating ensures proper prep, high-quality materials, and even application that lasts longer.

Yes, but not immediately. New asphalt should cure for at least 90 days before applying a sealcoat.

Parking lot sealcoating costs vary based on square footage, prep work, and layout. Most commercial jobs are priced per square foot or per lot.

Driveway sealcoating typically costs between $150 and $400, depending on the size and condition of the surface.

Sealcoating is best done between late spring and early fall, when temperatures are consistently above 50°F and the weather is dry.

Most sealcoated surfaces need 24–48 hours to fully cure, depending on weather conditions like temperature and humidity.

Sealcoating helps prevent new cracks, but it doesn't repair deep or structural damage. Minor cracks may be filled before the sealcoat is applied.

Parking lot sealcoating is the process of applying a sealant to commercial asphalt lots to prevent cracks, potholes, fading, and water damage—while improving safety and appearance.

Every 2–3 years is recommended for most driveways in Columbus, depending on usage, weather exposure, and wear.

Driveway sealcoating is a protective layer applied over asphalt to guard against weather, water, UV rays, and oil stains. It helps extend the life of your driveway and keeps it looking fresh.